Skip to main content Skip to search Skip to main navigation
We ship from Seiffen all over the world
Made in Germany
Know-how from 20 years

Electric kit for 10 candle arch with grommet and disc by SEIFFEN.COM

Electric kit for 10 candle arch with grommet and disc by SEIFFEN.COM

Kit for 10 light arch, 10 corrugated candles 23 volt, 1 connection cable with switch, 1 lister terminal, 1 strain relief, 10 candle sleeves completely assembled with approx. 12 cm long leads, 10 crimp connectors, 10 wooden washers, 1 lead 60 cm

Instructions for the component set of a Schwibbogen in series connection

- 10 candles is with 23 V
The main part of the component set are the candle holders,which consists of socket,sleeve,grommet (made of wood),2-fold insulated wires with ca.26 cm long contacts and the candle.

This candle socket is then attached to the intended locations of the existing arc. The two insulated wires (outer-diameter strand 2.5 mm) are cut in half and then cut to the appropriate length. Then the ends must be stripped and connected in series with the wires of the other candle sockets. This is done either by means of parallel connectors (is included in the component set) or by soldering.
The connection of the last two free wires is done with a luster terminal, which is hidden in the base of the Schwibbogen. In doing so, one of the two wires must be connected with the enclosed lead of about. 60cm from one side of the Schwibbogen to the Lüsterklemme be extended. Furthermore, the connecting cable with switch is again connected to the Lüsterklemme.The candles are screwed in and already the Schwibbogen is electrically installed.

It should be noted, that when soldering the wires, the solder joint must be stripped with heat shrink tubing (is not included in the component set).
In addition, when using LED candles to pay attention, that then only LED candles must be used, since LED candles are not compatible with other candles.

Safety note:
Electrical installations should only be carried out by people with the necessary electrotechnical expertise. Therefore, on the part of SEIFFEN.COM by Nestler no liability is assumed for the installation and use of the component set.

Product details
Manufacturer :
Manufacturer Reference:
SEIFFEN.COM by Nestler GmbH, c/o chg-Leuchten, Hauptstraße 132, 09548 Seiffen, info@seiffen.com
Deep:
4,00 cm
Height:
20,00 cm
Länge:
4,00 cm
USP:
Original SEIFFEN.COM by Nestler!, hobby supplies
Wide:
13,00 cm
content:
1 Anschlußleitung mit Schalter, 1 Lüsterklemme, 1 Zugentlastung, 9 Quetschverbinder, 10 Holzscheiben, 10 Kerzenhülsen komplett mit ca. 12 cm langen Leitungen, 10 Riffelkerzen 23 V 3 W E10
country of manufacture:
Germany – Made in Germany
location:
indoor
number of lights:
10
place of origin:
Kurort Seiffen | Erzgebirge
power:
10 Riffelkerzen je 3 W , 10 corrugated candles, 23 V, 3 W, E10
product type:
electrical kit for candle arch
series:
kits for candle arches
voltage:
220 - 230 V
Reviews
Review this product
Einfach super
Sehr gutes Produkt, ist alles dabei was man braucht .Ich bin voll zufrieden.
Thomas Richter am 2024.12.10
super Bausatz!
Kein Kommentar hinterlegt.
Kai am 2024.11.24
Guter Bausatz
Kein Kommentar hinterlegt.
am 2023.12.04
Bewertung sehr gut
Hat alles bestens gekappt, super schnelle Lieferung.
Holger am 2022.12.21
Bausatz
Artikel und Lieferung sehr gut, sehr empfehlenswert, Ein Leuchtmittel asl Ersatz wäre schön gewesen.
anonym am 2021.02.01
Sehr gut
Alles gut
am 2020.02.04
Bausatz für Schwippbögen 10er Kerzenset
Sehr schöner Artikel, man kann sehr schnell seinen alten Schwippbogen aufwerten.
Reinhard Höhns am 2019.12.12
Toller Artikel und prima Lieferung. Sehr zu empfehlen!
Kein Kommentar hinterlegt.
am 2019.11.02
Do you have questions about the product?
Description
Electric kit for 10 candle arch with grommet and disc by SEIFFEN.COM

Kit for 10 light arch, 10 corrugated candles 23 volt, 1 connection cable with switch, 1 lister terminal, 1 strain relief, 10 candle sleeves completely assembled with approx. 12 cm long leads, 10 crimp connectors, 10 wooden washers, 1 lead 60 cm

Instructions for the component set of a Schwibbogen in series connection

- 10 candles is with 23 V
The main part of the component set are the candle holders,which consists of socket,sleeve,grommet (made of wood),2-fold insulated wires with ca.26 cm long contacts and the candle.

This candle socket is then attached to the intended locations of the existing arc. The two insulated wires (outer-diameter strand 2.5 mm) are cut in half and then cut to the appropriate length. Then the ends must be stripped and connected in series with the wires of the other candle sockets. This is done either by means of parallel connectors (is included in the component set) or by soldering.
The connection of the last two free wires is done with a luster terminal, which is hidden in the base of the Schwibbogen. In doing so, one of the two wires must be connected with the enclosed lead of about. 60cm from one side of the Schwibbogen to the Lüsterklemme be extended. Furthermore, the connecting cable with switch is again connected to the Lüsterklemme.The candles are screwed in and already the Schwibbogen is electrically installed.

It should be noted, that when soldering the wires, the solder joint must be stripped with heat shrink tubing (is not included in the component set).
In addition, when using LED candles to pay attention, that then only LED candles must be used, since LED candles are not compatible with other candles.

Safety note:
Electrical installations should only be carried out by people with the necessary electrotechnical expertise. Therefore, on the part of SEIFFEN.COM by Nestler no liability is assumed for the installation and use of the component set.

Product details
Manufacturer :
Manufacturer Reference:
SEIFFEN.COM by Nestler GmbH, c/o chg-Leuchten, Hauptstraße 132, 09548 Seiffen, info@seiffen.com
Deep:
4,00 cm
Height:
20,00 cm
Länge:
4,00 cm
USP:
Original SEIFFEN.COM by Nestler!, hobby supplies
Wide:
13,00 cm
content:
1 Anschlußleitung mit Schalter, 1 Lüsterklemme, 1 Zugentlastung, 9 Quetschverbinder, 10 Holzscheiben, 10 Kerzenhülsen komplett mit ca. 12 cm langen Leitungen, 10 Riffelkerzen 23 V 3 W E10
country of manufacture:
Germany – Made in Germany
location:
indoor
number of lights:
10
place of origin:
Kurort Seiffen | Erzgebirge
power:
10 Riffelkerzen je 3 W , 10 corrugated candles, 23 V, 3 W, E10
product type:
electrical kit for candle arch
series:
kits for candle arches
voltage:
220 - 230 V
Reviews
Review this product
Einfach super
Sehr gutes Produkt, ist alles dabei was man braucht .Ich bin voll zufrieden.
Thomas Richter am 2024.12.10
super Bausatz!
Kein Kommentar hinterlegt.
Kai am 2024.11.24
Guter Bausatz
Kein Kommentar hinterlegt.
am 2023.12.04
Bewertung sehr gut
Hat alles bestens gekappt, super schnelle Lieferung.
Holger am 2022.12.21
Bausatz
Artikel und Lieferung sehr gut, sehr empfehlenswert, Ein Leuchtmittel asl Ersatz wäre schön gewesen.
anonym am 2021.02.01
Sehr gut
Alles gut
am 2020.02.04
Bausatz für Schwippbögen 10er Kerzenset
Sehr schöner Artikel, man kann sehr schnell seinen alten Schwippbogen aufwerten.
Reinhard Höhns am 2019.12.12
Toller Artikel und prima Lieferung. Sehr zu empfehlen!
Kein Kommentar hinterlegt.
am 2019.11.02
Questions about the product
Skip product gallery

You might also like

Elektrobausatz für 5er Schwibbogen mit Tülle und Muffe von SEIFFEN.COM_1

Average rating of 5 out of 5 stars

Electric kit for 5 candle arch with grommet and socket by SEIFFEN.COM
Regular price: $24.89
Art-Nr:
Electric kit for 7-piece candle arch with spout and disk by SEIFFEN.COM_1

Average rating of 4.5 out of 5 stars

Electric kit for 7-piece candle arch with spout and disk by SEIFFEN.COM
Regular price: $27.38
Art-Nr:
Elektrobausatz für 7er Schwibbogen_1

Average rating of 5 out of 5 stars

construction set 7er Schwibbogen
Regular price: $27.38
Art-Nr:
Elektrobausatz für 10er Schwibbogen mit Tülle und Verbindungsmuffe von SEIFFEN.COM_1

Average rating of 5 out of 5 stars

Electric kit for 10 candle arch with grommet and connecting sleeve by SEIFFEN.COM
Regular price: $37.34
Art-Nr: